HUATEC GROUP CORPORATION
HUATEC GROUP CORPORATION Professional Non Destructive Testing Equipment
Add to Cart
Cross Hatch Cutter
Introduction:
2202 Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359standards.
This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate.
Main Technical Parameters:
1. Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade.
2. Multi-cutting blades spacing:1mm/2mm/3mm
3. The number of square:25squares/100squares
Technical Specification:
| Cutting Head No. | Gap(mm) | Blades | Cutters Edges | Coating Thickness(µm) |
| 2202/1 | 1 | 6 | 8 | 0~60 |
| 2202/2 | 1 | 11 | 8 | 0~60 |
| 2202/3 | 1.5 | 6 | 8 | 0~60 |
| 2202/4 | 2 | 6 | 8 | 61~120 |
| 2202/6 | 3 | 6 | 8 | 121~250 |
Order Information :
| Standard Kit | Contain |
| 2202/1C | Cross Hatch Cutter + Carry Case + Hexagonal Screwdriver + Brush + Magnifier + Tape |
| 2202/2C | |
| 2202/3C | |
| 2202/4C | |
| 2202/6C | |
| Simple Kit | Contain |
| 2202/1S | Cross Hatch Cutter + Paper Box + Hexagonal Screwdriver |
| 2202/2S | |
| 2202/3S | |
| 2202/4S | |
| 2202/6S |